The wrapping functions are also generated by PEG.js, so the comment
should be above them to mark them as such. This shouldn't cause any
problems technically.
Instead of testing arguments.length to see whether an optional parameter
was passed to a function, compare its value to "undefined". This
approach has two advantages:
* It is in line with handling of default parameters in ES6.
* Optional parameters are actually spelled out in the parameter
list.
There is also one important disadvantage, namely that it's impossible to
pass "undefined" as an optional parameter value. This required a small
change in two tests.
Additional notes:
* Default parameter values are set in assignments immediately
after the function header. This reflects the fact that these
assignments really belong to the parameter list (which is where they
are in ES6).
* Parameter values are checked against "void 0" in places where
"undefined" can potentially be redefiend.
Labels in expressions like "(a:"a")" or "(a:"a" b:"b" c:"c")" were
visible to the outside despite being wrapped in parens. This commit
makes them invisible, as they should be.
Note this required introduction of a new "group" AST node, whose purpose
is purely to provide label scope isolation. This was necessary because
"label" and "sequence" nodes don't (and can't!) provide this isolation
themselves.
Part of a fix of #396.
Before this commit, generated parsers considered the following character
sequences as newlines:
Sequence Description
------------------------------
"\n" Unix
"\r" Old Mac
"\r\n" Windows
"\u2028" line separator
"\u2029" paragraph separator
This commit limits the sequences only to "\n" and "\r\n". The reason is
that nobody uses Unicode newlines or "\r" in practice.
A positive side effect of the change is that newline-handling code
became simpler (and likely faster).
Fix the following errors:
31:9 error "parser" is defined but never used no-unused-vars
406:14 error "expected" is defined but never used no-unused-vars
1304:15 error "s1" is defined but never used no-unused-vars
1386:15 error "s1" is defined but never used no-unused-vars
1442:15 error "s1" is defined but never used no-unused-vars
The expectation deduplication algorithm called |Array.prototype.splice|
to eliminate each individual duplication, which was slow. This caused
problems with grammar/input combinations that generated a lot of
expecations (see #377 for an example).
This commit replaces the algorithm with much faster one, eliminating the
problem.
In the past year I worked on various grammars where first/rest or
head/tail were used as labels for parts of lists. I found I associate
head/tail with a list immediately, while in case of first/rest I have to
"parse" grammar rules for a while before understanding their structure.
Moreover, I tend to assume that rest is a list of the same thigs as
first, but I don't have such assumption in case of head/tail. This
assumption was in conflict with the grammar structure.
I'm not sure how much these observations are applicable to others, but I
decided to act on them and switch from first/rest to head/tail.
The |found| property wasn't very useful as it mostly contained just one
character or |null| (the exception being syntax errors triggered by
|error| or |expected|). Similarly, the "but XXX found" part of the error
message (based on the |found| property) wasn't much useful and was
redundant in presence of location info.
For these reasons, this commit removes the |found| property and
corresponding part of the error message from syntax errors. It also
modifies error location info slightly to cover a range of 0 characters,
not 1 character (except when the error is triggered by |error| or
|expected|). This corresponds more precisely to the actual situation.
Fixes#372.
* In strict mode code, functions can only be declared at top level or
immediately within another function. This means functions defined in
the initializer would throw.
Before this commit, position details (line and column) weren't computed
efficiently from the current parse position. There was a cache but it
held only one item and it was rarely hit in practice. This resulted in
frequent rescanning of the whole input when the |location| function was
used in various places in a grammar.
This commit extends the cache to remember position details for any
position they were ever computed for. In case of a cache miss, the cache
is searched for a value corresponding to the nearest lower position,
which is then used to compute position info for the desired position
(which is then cached). The whole input never needs to be rescanned.
No items are ever evicted from the cache. I think this is fine as the
max number of entries is the length of the input. If this becomes a
problem I can introduce some eviction logic later.
The performance impact of this change is significant. As the benchmark
suite doesn't contain any grammar with |location| calls I just used a
little ad-hoc benchmark script which measured time to parse the grammar
of PEG.js itself (which contains |location| calls):
var fs = require("fs"),
parser = require("./lib/parser");
var grammar = fs.readFileSync("./src/parser.pegjs", "utf-8"),
startTime, endTime;
startTime = (new Date()).getTime();
parser.parse(grammar);
endTime = (new Date()).getTime();
console.log(endTime - startTime);
The measured time went from ~293 ms to ~54 ms on my machine.
Fixes#337.
Replace |line|, |column|, and |offset| properties of |SyntaxError| with
the |location| property. It contains an object similar to the one
returned by the |location| function available in action code:
{
start: { offset: 23, line: 5, column: 6 },
end: { offset: 25, line: 5, column: 8 }
}
For syntax errors produced in the middle of the input, |start| refers to
the first unparsed character and |end| refers to the character behind it
(meaning the span is 1 character). This corresponds to the portion of
the input in the |found| property.
For syntax errors produced the end of the input, both |start| and |end|
refer to a character past the end of the input (meaning the span is 0
characters).
For syntax errors produced by calling |expected| or |error| functions in
action code the location info is the same as the |location| function
would return.
Preform the following renames:
* |reportedPos| -> |savedPos| (abstract machine variable)
* |peg$reportedPos| -> |peg$savedPos| (variable in generated code)
* |REPORT_SAVED_POS| -> |LOAD_SAVED_POS| (instruction)
* |REPORT_CURR_POS| -> |UPDATE_SAVED_POS| (instruction)
The idea is that the name |reportedPos| is no longer accurate after the
|location| change (seea the previous commit) because now both
|reportedPos| and |currPos| are reported to user code. Renaming to
|savedPos| resolves this inaccuracy.
There is probably some better name for the concept than quite generic
|savedPos|, but it doesn't come to me.
Replace |line|, |column|, and |offset| functions with the |location|
function. It returns an object like this:
{
start: { offset: 23, line: 5, column: 6 },
end: { offset: 25, line: 5, column: 8 }
}
In actions, |start| refers to the position at the beginning of action's
expression and |end| refers to the position after the end of action's
expression. This allows one to easily add location info e.g. to AST
nodes created in actions.
In predicates, both |start| and |end| refer to the current position.
Fixes#246.
The |stringEscape| function both in lib/compiler/javascript.js and in
generated parsers didn't escape characters in the U+0100..U+107F and
U+1000..U+107F ranges.
Initializer code is usually indented and this indentation is carried
over to generated code. This resulted in a piece of indented code in the
middle of the parser.
This commit wraps initializer code in |{...}|, which makes indentation
in generated parsers look a bit more natural.
The action/predicate code didn't have access to the parser object. This
was mostly a side effect actions/predicates being implemented as nested
functions, in which |this| is a reference to the global object (an ugly
JavaScript quirk). The initializer, being implemented differently, had
access to the parser object via |this|, but this was not documented.
Because having access to the parser object can be useful, this commits
introduces a new |parser| variable which holds a reference to it, is
visible in action/predicate/initializer code, and is properly
documented.
See also:
https://groups.google.com/forum/#!topic/pegjs/Na7YWnz6Bmg
This is mostly done for consistency with the JavaScript example grammar,
from which the |Identifier| rule is taken from. See the previous commit
for details.
Instead of matching segments between blocks character by character,
match them as a whole. Also align the style with other similar rules
(e.g. the comment ones).
Before this commit, line continuations in character classes contributed
an empty string to the list of characters and character ranges matched
by a class. While this didn't lead to a buggy behavior with the current
code generator, the AST was wrong and the problem could have caused bugs
later.
This commit fixes the problem.
Semantic predicates are kind of |PrimaryExpression|, not kind of
|PrefixedExpression|. Therefore I extracted a rule for them and
referenced it from the |PrimaryExpression|.
Initializer and rules are now separated in a similar way as JavaScript
statements -- either by a semicolon or a line terminator, possibly with
whitespace and comments mixed in.
One consequence is that the grammars like this are now illegal:
foo = "a" bar = "b"
A semicolon needs to be inserted between the rules:
foo = "a";bar = "b"
I consider this a good change as the now-illegal syntax was somewhat
confusing.
This makes the |Primary| rule a bit more tidy. Also, matching the |.|
character really belongs to the lexical part of the grammar, next to
literals and character classes.
* Rename the |Action| rule to |CodeBlock| (it better describes what
the rule matches).
* Implement the rule in a simpler way and move it after more basic
lexical elements.
This change has two side effects:
* Label names can no longer be JavaScript reserved words.
* |$| is allowed again in label names. However, because of the
preference rules, names starting with it will be usually parsed as a
text operator followed by another identifier (denoting a rule
reference or label name).
Before this commit, whitespace was handled at the lexical level by
making tokens consume any whitespace coming after them. This was
accomplished by appending |__| to every token rule.
This commit changes whitespace handling to be more explicit. Tokens no
longer consume whitespace coming after them and syntactic rules have to
cope with it. While this slightly complicates the syntactic grammar, I
think it's a cleaner way. Moreover, it is what JavaScript example
grammar does.
One small side-effect of thich change is that the grammar is now
stand-alone (it doesn't require utils.js anymore).
When rule names are capitalized, it's easier to visually distinguish
them from non-capitalized label names. Moreover, I use capitalized rule
names in all my grammars these days.
Before this commit, a line continuation (backslash followed by a line
terminator character) contributed a character to a string or a character
class it was used in. In JavaScript and many other languages, line
continuation doesn't contribute anything.
This commit aligns PEG.js line continuation behavior with JavaScript.
Before this commit, the value of the |rawText| property of "class" AST
nodes was created in a hackish way from processed input and it didn't
always exactly represent the actual input text.
This commit changes the code so that the value of the |rawText| property
is created using the |text| function. This is a clean way which also
resolves the exact representation problem.
In case the generated parser parsed successfully part of input and left
some input unparsed (trailing input), the error message produced was
sometimes wrong. The code worked correctly only if there were no match
failures in the successfully parsed part (highly unlikely).
This commit fixes things by explicitly triggering a match failure with the
following expectation at the end of the successfully parsed part of the
input:
peg$fail({ type: "end", description: "end of input" });
This change also made it possible to simplify the |buildMessage|
function, which can now ignore the case of no expectations.
Fixes#119.
The error check was useful when actions could have returned |null| to
trigger a match failure. This is no longer supported so the check isn't
needed anymore.
Speed impact
------------
Before: 1022.70 kB/s
After: 1035.45 kB/s
Difference: 1.24%
Size impact
-----------
Before: 975434 b
After: 931540 b
Difference: -4.50%
(Measured by /tools/impact with Node.js v0.6.18 on x86_64 GNU/Linux.)
Before this commit, the |expected| and |error| functions didn't halt the
parsing immediately, but triggered a regular match failure. After they
were called, the parser could backtrack, try another branches, and only
if no other branch succeeded, it triggered an exception with information
possibly based on parameters passed to the |expected| or |error|
function (this depended on positions where failures in other branches
have occurred).
While nice in theory, this solution didn't work well in practice. There
were at least two problems:
1. Action expression could have easily triggered a match failure later
in the input than the action itself. This resulted in the
action-triggered failure to be shadowed by the expression-triggered
one.
Consider the following example:
integer = digits:[0-9]+ {
var result = parseInt(digits.join(""), 10);
if (result % 2 === 0) {
error("The number must be an odd integer.");
return;
}
return result;
}
Given input "2", the |[0-9]+| expression would record a match
failure at position 1 (an unsuccessful attempt to parse yet another
digit after "2"). However, a failure triggered by the |error| call
would occur at position 0.
This problem could have been solved by silencing match failures in
action expressions, but that would lead to severe performance
problems (yes, I tried and measured). Other possible solutions are
hacks which I didn't want to introduce into PEG.js.
2. Triggering a match failure in action code could have lead to
unexpected backtracking.
Consider the following example:
class = "[" (charRange / char)* "]"
charRange = begin:char "-" end:char {
if (begin.data.charCodeAt(0) > end.data.charCodeAt(0)) {
error("Invalid character range: " + begin + "-" + end + ".");
}
// ...
}
char = [a-zA-Z0-9_\-]
Given input "[b-a]", the |charRange| rule would fail, but the
parser would try the |char| rule and succeed repeatedly, resulting
in "b-a" being parsed as a sequence of three |char|'s, which it is
not.
This problem could have been solved by using negative predicates,
but that would complicate the grammar and still wouldn't get rid of
unintuitive behavior.
Given these problems I decided to change the semantics of the |expected|
and |error| functions. They don't interact with regular match failure
mechanism anymore, but they cause and immediate parse failure by
throwing an exception. I think this is more intuitive behavior with less
harmful side effects.
The disadvantage of the new approach is that one can't backtrack from an
action-triggered error. I don't see this as a big deal as I think this
will be rarely needed and one can always use a semantic predicate as a
workaround.
Speed impact
------------
Before: 993.84 kB/s
After: 998.05 kB/s
Difference: 0.42%
Size impact
-----------
Before: 1019968 b
After: 975434 b
Difference: -4.37%
(Measured by /tools/impact with Node.js v0.6.18 on x86_64 GNU/Linux.)
The |error| function allows users to report custom match failures inside
actions.
If the |error| function is called, and the reported match failure turns
out to be the cause of a parse error, the error message reported by the
parser will be exactly the one specified in the |error| call.
Implements part of #198.
Speed impact
------------
Before: 999.83 kB/s
After: 1000.84 kB/s
Difference: 0.10%
Size impact
-----------
Before: 1017212 b
After: 1019968 b
Difference: 0.27%
(Measured by /tools/impact with Node.js v0.6.18 on x86_64 GNU/Linux.)
This is in anticipation of |peg$error|. The |peg$expected| and
|peg$error| internal functions will nicely mirror the |expected| and
|error| functions available to user code in actions.
Implements part of #198.
The |expected| function allows users to report regular match failures
inside actions.
If the |expected| function is called, and the reported match failure
turns out to be the cause of a parse error, the error message reported
by the parser will be in the usual "Expected ... but found ..." format
with the description specified in the |expected| call used as part of
the message.
Implements part of #198.
Speed impact
------------
Before: 1146.82 kB/s
After: 1031.25 kB/s
Difference: -10.08%
Size impact
-----------
Before: 950817 b
After: 973269 b
Difference: 2.36%
(Measured by /tools/impact with Node.js v0.6.18 on x86_64 GNU/Linux.)
After making the |?| operator return |null| instead of an empty string
in the previous commit, empty strings were still returned from
predicates. This didn't make much sense.
Return value of a predicate is unimportant (if you have one in hand, you
already know the predicate succeeded) and one could even argue that
predicates shouldn't return any value at all. The closest thing to
"return no value" in JavaScript is returning |undefined|, so I decided
to make predicates return exactly that.
Implements part of #198.
Before this commit, the |?| operator returned an empty string upon
unsuccessful match. This commit changes the returned value to |null|. It
also updates the PEG.js grammar and the example grammars, which used the
value returned by |?| quite often.
Returning |null| is possible because it no longer indicates a match
failure.
I expect that this change will simplify many real-world grammars, as an
empty string is almost never desirable as a return value (except some
lexer-level rules) and it is often translated into |null| or some other
value in action code.
Implements part of #198.
Using a special value to indicate match failure instead of |null| allows
actions to return |null| as a regular value. This simplifies e.g. the
JSON parser.
Note the special value is internal and intentionally undocumented. This
means that there is currently no official way how to trigger a match
failure from an action. This is a temporary state which will be fixed
soon.
The negative performance impact (see below) is probably caused by
changing lot of comparisons against |null| (which likely check the value
against a fixed constant representing |null| in the interpreter) to
comparisons against the special value (which likely check the value
against another value in the interpreter).
Implements part of #198.
Speed impact
------------
Before: 1146.82 kB/s
After: 1031.25 kB/s
Difference: -10.08%
Size impact
-----------
Before: 950817 b
After: 973269 b
Difference: 2.36%
(Measured by /tools/impact with Node.js v0.6.18 on x86_64 GNU/Linux.)
Before this commit, the |expected| property of an exception object
thrown when a generated parser encountered an error contained
expectations as strings. These strings were in a human-readable format
suitable for displaying in the UI but not suitable for machine
processing. For example, expected string literals included quotes and a
string "any character" was used when any character was expected.
This commit makes expectations structured objects. This makes the
machine processing easier, while still allowing to generate a
human-readable representation if needed.
Implements part of #198.
Speed impact
------------
Before: 1180.41 kB/s
After: 1165.31 kB/s
Difference: -1.28%
Size impact
-----------
Before: 863523 b
After: 950817 b
Difference: 10.10%
(Measured by /tools/impact with Node.js v0.6.18 on x86_64 GNU/Linux.)
The deduplication skipped over an expected string right after the one
that was removed because the index variable was incorrectly incremented
in that case.
Based on a patch by @fresheneesz:
https://github.com/dmajda/pegjs/pull/146
This is a complete rewrite of the PEG.js code generator. Its goals are:
1. Allow optimizing the generated parser code for code size as well as
for parsing speed.
2. Prepare ground for future optimizations and big features (like
incremental parsing).
2. Replace the old template-based code-generation system with
something more lightweight and flexible.
4. General code cleanup (structure, style, variable names, ...).
New Architecture
----------------
The new code generator consists of two steps:
* Bytecode generator -- produces bytecode for an abstract virtual
machine
* JavaScript generator -- produces JavaScript code based on the
bytecode
The abstract virtual machine is stack-based. Originally I wanted to make
it register-based, but it turned out that all the code related to it
would be more complex and the bytecode itself would be longer (because
of explicit register specifications in instructions). The only downsides
of the stack-based approach seem to be few small inefficiencies (see
e.g. the |NIP| instruction), which seem to be insignificant.
The new generator allows optimizing for parsing speed or code size (you
can choose using the |optimize| option of the |PEG.buildParser| method
or the --optimize/-o option on the command-line).
When optimizing for size, the JavaScript generator emits the bytecode
together with its constant table and a generic bytecode interpreter.
Because the interpreter is small and the bytecode and constant table
grow only slowly with size of the grammar, the resulting parser is also
small.
When optimizing for speed, the JavaScript generator just compiles the
bytecode into JavaScript. The generated code is relatively efficient, so
the resulting parser is fast.
Internal Identifiers
--------------------
As a small bonus, all internal identifiers visible to user code in the
initializer, actions and predicates are prefixed by |peg$|. This lowers
the chance that identifiers in user code will conflict with the ones
from PEG.js. It also makes using any internals in user code ugly, which
is a good thing. This solves GH-92.
Performance
-----------
The new code generator improved parsing speed and parser code size
significantly. The generated parsers are now:
* 39% faster when optimizing for speed
* 69% smaller when optimizing for size (without minification)
* 31% smaller when optimizing for size (with minification)
(Parsing speed was measured using the |benchmark/run| script. Code size
was measured by generating parsers for examples in the |examples|
directory and adding up the file sizes. Minification was done by |uglify
--ascii| in version 1.3.4.)
Final Note
----------
This is just a beginning! The new code generator lays a foundation upon
which many optimizations and improvements can (and will) be made.
Stay tuned :-)
Implement a new syntax to extract matched strings from expressions. For
example, instead of:
identifier = first:[a-zA-Z_] rest:[a-zA-Z0-9_]* { return first + rest.join(""); }
you can now just write:
identifier = $([a-zA-Z_] [a-zA-Z0-9_]*)
This is useful mostly for "lexical" rules at the bottom of many
grammars.
Note that structured match results are still built for the expressions
prefixed by "$", they are just ignored. I plan to optimize this later
(sometime after the code generator rewrite).
Getting rid of the |trackLineAndColumn| simplifies the code generator
(by unifying two paths in the code).
The |line| and |column| functions currently always compute all the
position info from scratch, which is horribly ineffective. This will be
improved in later commit(s).
This will allow to compute position data lazily and get rid of the
|trackLineAndColumn| option without affecting performance of generated
parsers that don't use position data.
Before this commit, |PEG.buildParser| always returned a parser object.
The only way to get its source code was to call the |toSource| method on
it. While this method worked for parsers produced by |PEG.buildParser|
directly, it didn't work for parsers instantiated by executing their
source code. In other words, it was unreliable.
This commit remvoes the |toSource| method on generated parsers and
introduces a new |output| option to |PEG.buildParser|. It allows callers
to specify whether they want to get back the parser object
(|options.output === "parser"|) or its source code (|options.output ===
"source"|). This is much better and more reliable API.
Includes:
* Moving the source code from /src to /lib.
* Adding an explicit file list to package.json
* Updating the Makefile.
* Updating the spec and benchmark suites and their READMEs.
Part of a fix for GH-32.
David Majda
Marco Baumgartl
Arlo Breault
David Majda